The working power supply of this wireless remote control module receiving board is AC220V, which is suitable for electrical control circuits of anti-theft alarm, remote control electric doors and windows, signal control, industrial control, lifting equipment, etc.
Receiving board technical indicators
1. Working voltage: AC220V
2. Working frequency: 315MHZ
3. Contact capacity: 10A, 250VAC
4. Working current: less than 20mA
5. Receiving sensitivity:>-105dB
6. Remote control distance: more than 30 meters（Open ground）
7. Output status: self-locking, interlocking, non-locking (choose one of them) passive contact
8. Specification: 110*55*27MM
9, outside shell: yes
remote control technical indicators
1. Working voltage: DC12V（One 23A battery）
2. Working current: ≤9mA
3. Working frequency: 315MHz
4. Coding type: pad
5. Encoding type: fixed code
6. Overall dimensions: 60*37*15mm
7. Shell color: peach wood grain
8. Oscillation resistance: 1.5M
Accessories: 1 four-button remote
1. Interlocking type: The relays alternately pull in. If you press the A key, A is connected and locked and always connected, then press the B key to disconnect A, B is connected and locked and always connected, the C key, D key and so on, four-way interlocking, only one connection It can be used in practical applications such as electric fan gear switch circuit and so on.
2, self-locking type: the relays work independently and do not interfere with each other. Press the remote control button to pull in the corresponding relay. For example, press the A key once to turn on, and press the A key again to turn off. The same is true for B, C, and D. The four channels can be turned on and off independently. The operation of each key will only affect the corresponding relay. It is valid and does not affect other relays. It can remotely control 4 channels at the same time, such as the control of lamps and lanterns.
3, non-locking（Jog）Type: Can not work at the same time, only one of them can be jog work. If you press the A key firmly, A is connected, and the hand is released and disconnected. A, B, C, and D cannot work independently at the same time. It is suitable for circuits that only need a high level, such as electric doors, electric door locks, and single-chip connection.
Learning method: turn on the power supply, press and hold the learning button on the control panel until the red and green indicator lights go out, release the learning button, then press any key on the remote control, and wait for the green indicator light to flash, indicating successful learning, let go Remote control button, after learning, wait for the green indicator to flash once, exit the learning state and enter the working state, and learn at most8Remote control.
Clear learning code: keep pressing the learning button until the red light flashes, indicating that the deletion is successful.
Switch state setting: press once to learn, press the red and green indicator light to change a state,
Self-locking: red light off, green light on
Interlock: the red light is on, the green light is off.
Non-locking: red light is on, green light is on
The product has been configured with the remote control at the factory, and the user can use it as long as it is connected.
